click to enlarge
	Instructions White Metal Casting Sample Molds Tips & Tricks

Cold Mold Compound

Now you can make a rubber mold for wax injection without heat and without mixing and pouring liquids. This 0% shrinkage silicone rubber is a 2-part putty that you simply knead together and then press into a standard mold frame to cure under pressure, without heat for 30 minutes. Packaged in two containers, part A and part B, weighing a total of 1 lb.

• Working Time:  2 min. (approx)
• Cure Time:  30 min. (approx)
• Durometer:  35
• Shrinkage:  0%
• Tensile Strength:  400 psi
• Tear Strength:  55 ppi
• Elongation:  375%