| |
When used with your compressed air source, the GraverMax SC is an easy-to-use system that enables you to engrave, set stones, carve, sculpt, and decorate metal, wood, leather, ivory, and many other materials. Gravers or other carving tools are held in one of a variety of reciprocating impact handpieces (sold separately). The force of the impact is controlled by a foot pedal while the impact speed (400 to 8,000 strokes per minute) is governed by the front mounted dial adjustment on the control box. The engraved cuts and carved lines you make are identical to traditional hand techniques but are accomplished much more quickly and with far less effort. Using a variety of tools, the impact handpieces also impart a hammering effect, so you can bezel and channel-set stones, inlay metal, repoussé, and apply custom textures. GraverMax SC provides the widest range of hammer power available: fine enough to set emeralds in gold safely and heavy enough to create deep textures in steel. All the while, your handpiece remains cool, because it is powered by air. All air inlet and outlet connections are through quick-disconnect fittings. Two handpieces may be connected simultaneously and are engaged individually by the handpiece selector knob. A third, auxiliary outlet is provided with its own shut-off selector switch. Requires 1.4 CFM of compressed air at @45 PSI minimum (40 liters per minute at 3 bar minimum). Furnished with foot control, air filter, and hoses. Measures 5-1/2" x 11-1/2" x 8-1/2" high. 100-240 volts, 50/60 cycles. Handpieces sold separately. Made in USA.
|
|
click to enlarge
